Send Email
Send SMS
Search


Stellite

Pioneers in the industry, we offer stellite rods, stellite 6 plates and stellite round bar from India.

Stellite Rods

REQUEST CALLBACK

Stellite Rods
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 3,900 / KgGet Latest Price

Product Details:
Minimum Order Quantity20 Kg
Usage/ApplicationWELDING
Single Piece LengthCUSTOMIZED
Size/DiameterAS PER REQUIREMENT
ShapeROUND
Hardness40-46 HRC
StandardAWS 5.21-2001

We are the leading Importers, traders and supplier of STELLITE RODS of different grades and customised as per the requirement of the customers with all the requirement certifications
Yes! I am Interested

Stellite 6 Plates

REQUEST CALLBACK

Stellite 6 Plates
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 2,500 / KilogramGet Latest Price

Product Details:
Minimum Order Quantity1 Kilogram
Material GradeStellite 6 Plates
SizeAS PER REQUIREMENT
StandardAstm
ShapeSQUARE AND RECTANGULAR
BrandMAGNUM INDUSTRIAL SOLUTIONS
Thickness0-10 mm

Product Description These grades contain 25% chromium and 20% nickel, making them highly resistant to oxidation and corrosion. Grade 310 is a lower carbon version, less prone to embrittlement and sensitisation in service. The high chromium and medium nickel content make these steels capable for applications in reducing sulphur atmospheres containing H2S. They are widely used in moderately carburising atmospheres, as encountered in petrochemical environments. For more severe carburising atmospheres other heat resisting alloys should be selected.In common with other austenitic stainless steels, these grades cannot be hardened by heat treatment. They can be hardened by cold work, but this is rarely practiced.
Yes! I am Interested

Stellite Round Bar

REQUEST CALLBACK

Stellite Round Bar
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 2,000 / KgGet Latest Price

Product Details:
Minimum Order Quantity20 Kg
Material GradeSTELLITE
Size5 TO 500 MM DIA
BrandIMPORTED
ShapeRound
Usage/ApplicationManufacturing
Single Piece Length3 meter
Test CertificateLab Tc

Stellite alloys are a group of cobalt-chromium 'super-alloys' consisting of complex carbides in an alloy matrix predominantly designed for high wear resistance and superior chemical and corrosion performance in hostile environments. The combination of Cobalt and Chromium also results in an extremely high melting point making them perfect for a range of intriguing applications from extreme cutting tools to hot section alloy coatings in gas turbines. They may also contain molybdenum or tungsten and a small amount of carbon to offer even greater performance for specific applications.

Typical Chemical Properties of Stellite Alloys

There are several types and variations of stellite superalloys containing varying levels of: titanium, silicon, sulfur, phosphorus, molybdenum, manganese, chromium, carbon, boron, aluminium, iron, nickel and cobalt in different quantities. Most of the stellite alloys contain four to six of these elements. The Carbon content (and hence carbide volume) of a Stellite alloy is incredibly influential on the materials performance. Therefore, it is possible to group Stellite alloys as follows:

  • High carbon - designed for high wear applications
  • Low carbon - for high temperature uses
  • Low carbon / higher Chromium to combat corrosion

Chromium is also an extremely important component of Stellite alloys, not only does it offer its high corrosion resistant properties to the alloy but it is also the predominant carbide former and it provides strength (as a solute) in the alloying matrix.

Typical Chemical composition of stellite 1:

ElementsContent
Cobalt, Co57%
Chromium, Cr28 - 32%
Tungsten, W11 - 13%
Carbon, C2 - 3 %
Silicon, Si1.20%
Iron, Fe1%
Nickel, Ni1%
Other1.50%
Mechanical Properties of Stellite 1 Alloy

The mechanical properties of stellite 1 are displayed in the table below:

PropertiesMetricImperial
Density8.69 g/cm30.314 lb/in3
Hardness, Rockwell C50-5850-58
Tensile strength1195 MPa173 ksi
Yield strength1050 MPa152 ksi
Modulus of elasticity230 GPa33.4x106 psi
Elongation at break<1%<1%
Yes! I am Interested

 
X


Explore More Products

Contact via E-mail
Contact via SMS
Magnum Industrial Solutions
Chirag Jain (Sales Head)
2/4, Pushpa Sadan Building 2nd Carpenter Street,
Mumbai - 400004, Maharashtra, India
Call Us: 
Call Response Rate: 88%
Share Us :
F G T L



Home  |   About Us   |  Our Products  |  Site Map  |   Contact Us

© Magnum Industrial Solutions. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

Magnum Industrial Solutions